In Partner Warehouse. Expected delivery on order 27.01.2025
Collets Diameter: 6 - 8 mm
Drive Type: Network
Electric cable length: 4 m
Fine adjustment: 8 mm
Horsepower: 1010 W
Idle engine speed: 9500 - 23000 min⁻¹
Open table: 50 mm
Ø attack dust suction: 27/36 mm
Quick adjustment: 55 mm
Advantages and benefits:
Handy: Thanks to the compact design and low weight.
Clear view: Milling area clearly visible.
Illuminated: Thanks to the rechargeable LED work light in the base plate.
In the blink of an eye: Quick and easy replacement of the cutter.
Accuracy: Milling depth adjustment precise to 1/10 mm.
Stable: Torsion-resistant base plate thanks to locking on both guide columns.
Side stop: Thanks to the central clamping with fine adjustment and sliding jaws, which do not require tools, the adjustment is quick and precise.
Greater safety: Thanks to the quick brake and protection against accidental restart.
Depending on the material: MMC Electronic for best work, with temperature control.
Integrated: Direct chip extraction in the milling table for tubes with diameters D 27 and D 36.
Main applications:
Rounding, chamfering, grooving and profiling of edges.
Iron cladding.
Grooving panels, inserting strips or milling plasterboard (chamfering).
Creation of series of holes in furniture construction with the LR 32 series drilling system.
Making wooden joints with VS 600.
Equipment:
Lateral stop with fine adjustment SA-OF 1010/MFK
LM-OF 1010 R light module
Locking pliers ø 8 mm
19mm spanner
Plug it network cable (4m)
Accessory set ZS-OF 1010 M
Guide rail FS 800/2
Systainer SYS3 M 237
All-inclusive guarantee.
Drive Type: Network
Electric cable length: 4 m
Fine adjustment: 8 mm
Horsepower: 1010 W
Idle engine speed: 9500 - 23000 min⁻¹
Open table: 50 mm
Ø attack dust suction: 27/36 mm
Quick adjustment: 55 mm
Advantages and benefits:
Handy: Thanks to the compact design and low weight.
Clear view: Milling area clearly visible.
Illuminated: Thanks to the rechargeable LED work light in the base plate.
In the blink of an eye: Quick and easy replacement of the cutter.
Accuracy: Milling depth adjustment precise to 1/10 mm.
Stable: Torsion-resistant base plate thanks to locking on both guide columns.
Side stop: Thanks to the central clamping with fine adjustment and sliding jaws, which do not require tools, the adjustment is quick and precise.
Greater safety: Thanks to the quick brake and protection against accidental restart.
Depending on the material: MMC Electronic for best work, with temperature control.
Integrated: Direct chip extraction in the milling table for tubes with diameters D 27 and D 36.
Main applications:
Rounding, chamfering, grooving and profiling of edges.
Iron cladding.
Grooving panels, inserting strips or milling plasterboard (chamfering).
Creation of series of holes in furniture construction with the LR 32 series drilling system.
Making wooden joints with VS 600.
Equipment:
Lateral stop with fine adjustment SA-OF 1010/MFK
LM-OF 1010 R light module
Locking pliers ø 8 mm
19mm spanner
Plug it network cable (4m)
Accessory set ZS-OF 1010 M
Guide rail FS 800/2
Systainer SYS3 M 237
All-inclusive guarantee.
