Overall for welders Maico2, navy 3XL, Delta Plus

Overalls. High collar closed by concealed press studs. Zip fastening with concealed studded flap. Elasticated back and waist on both sides.
Gusset on back. Adjustable cuffs with press-studs. 5 pockets including 1 inner. 2 gas detector holders.

Twill 99% cotton 1% Antistatic fibre 320 g/m².

EN ISO 13688:2013/A1:2021 General requirements for protective clothing.
Protective clothing - clothing to protect against heat and flame.

EN ISO 11612:2015 Protective clothing - clothing to protect against heat and flame.
A1, A2Limited flame spread (from A1 to A2, X=not tested)
B1Convective heat (from B1 to B3, X=not tested)
C1Radiant heat (from C1 to C4, X=not tested )
XProjection of molten aluminium (marking D1 to D3, X= not tested)
E3Projection of molten cast iron (from E1 to E3, X=not tested)
F1Contact heat (from F1 to F3, X=not tested)

EN ISO 11611:2015 Protective clothing for use in welding and related techniques
Welding class 1: Protection against low risks, low projections and radiant heat
TYPEA1Type A1 - ISO 15025 Test Method A
TYPEA2Type A2 - ISO 15025 Test Method B
Electrostatic properties - Part 5: Material performance and design requirements

EN1149-5:2018 Electrostatic properties - Part 5: Material performance and design requirements
Surface resistivity inferior or equal to 2.5x(10)9 Ohms on one surface at least following EN1149-1
t50 <4s or S> 0.2 by method 2 (charging by induction) of EN1149-3

EN14404:2004+A1: 2010 Knee protection for kneeling work
TYPE2Type 2 Knee Protection - In trouser pocket or attached to trousers in another manner
LEVEL0Performance level against the mecanics dangers (0 to 2). If level 0, the pictogramme is not included.
Protective clothing against the thermal hazards of an electric arc.

EN61482-2:2020 Protective clothing against the thermal hazards of an electric arc.
APCAPC 1Electrical arc protection class of materials and garments (APC 1=4kA or APC 2=7kA).
CAL/CM²5.4 cal/cm²Arc Thermal Performance Value (cal/cm²) .