Plaster finishing machine PFM WT with water tank, Rokamat

Working on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions.
Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required.
The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications.
Due to the large operation area of up to Ų 350 mm (trowel even Ų 450 mm), your work can be completed much faster and easier than by hand.
The PFM WT was formerly knows as ROKAMAT NAUTILO.

Applications:
Machining plaster, lime-cement render and clay plaster
Abrading render and plaster
Gypsum multi finish
Machining of fine finish plaster
Smoothing concrete elements
Sponging filler compounds

Advantages:
Built-in backpack water tank (6 l)
Uniform structure due to large operation area
Time- and cost-saving (approx. 50 % time saving compared to manual work)
Adjustable water injection by lever valve
Light weight hand tool

Fields of application
Plaster finishing: very good
Flattening fresh concrete: good
Working on scaffolding: very good


Working on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions.
Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required.
The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications.
Due to the large operation area of up to Ų 350 mm (trowel even Ų 450 mm), your work can be completed much faster and easier than by hand.
The PFM WT was formerly knows as ROKAMAT NAUTILO.

Technical data:
Power consumption1 000 W
Idle engine speed75-340 rpm
Volume water tank6 l
Net weight hand tool2,1 kg
Net weight backpack5,7 kg
Total weight1)9,4 kg
Accessory-Ų250/350 mm

Scope of supply:
Plaster finishing machine (water injection)
Strap
Supporting plate (velcro system)
Sponge disc diam 350 mm (Item no. 49300)
Case