Non-Contact AC-Voltage Detector 12 - 1000 V with vibration, PeakTech

The new voltage tester P 1032 is used for the contactless
detection of AC voltages on live cables and devices. By
switching the measuring range, it is possible to detect even
low voltages down to a minimum of 12V AC.
If you switch on the device, the tip glows green when no
voltage is applied. If AC voltage is present at the relevant
measuring point, this is indicated visually by a flashing red
LED and the integrated buzzer sounds. In addition, a
vibration motor ensures the detection of detected voltages
even in noisy and confusing work environments. If the user
presses the 12V shift key, the test probe lights up yellow.
Now the sensor is more sensitive and the frequency of the
acoustic and optical signal changes depending on the
distance from the voltage to be tested.
The integrated LED flashlight can be switched on at any
time, even if the actual voltage tester is switched off. In
addition, the device can be transported conveniently and
safely with the pocket clip. The ergonomic and modern
design, as well as the many practical features and the high
user safety due to overvoltage category IV 1000 V
completes the profile of the PeakTech 1032 voltage tester.

Operating Range: 12 ... 1000 V / 100 V ... 1000V AC
Frequency range: 50 / 60 Hz
Power supply: 2 x 1.5 V AAA (UM-4) batteries