Round files, 12 pack, 5/32, PRO

Working on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions.Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required.The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications.Due to the large operation area of up to Ų 350 mm (trowel even Ų 450 mm), your work can be completed much faster and easier than by hand.The PFM WT was formerly knows as ROKAMAT NAUTILO.Applications:Machining plaster, lime-cement render and clay plasterAbrading render and plasterGypsum multi finishMachining of fine finish plasterSmoothing concrete elementsSponging filler compoundsAdvantages:Built-in backpack water tank (6 l)Uniform structure due to large operation areaTime- and cost-saving (approx. 50 % time saving compared to manual work)Adjustable water injection by lever valveLight weight hand toolFields of applicationPlaster finishing: very goodFlattening fresh concrete: goodWorking on scaffolding: very goodWorking on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions.Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required.The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications.Due to the large operation area of up to Ų 350 mm (trowel even Ų 450 mm), your work can be completed much faster and easier than by hand.The PFM WT was formerly knows as ROKAMAT NAUTILO.Technical data:Power consumption1 000 WIdle engine speed75-340 rpmVolume water tank6 lNet weight hand tool2,1 kgNet weight backpack5,7 kgTotal weight1)9,4 kgAccessory-Ų250/350 mmScope of supply:Plaster finishing machine (water injection)StrapSupporting plate (velcro system)Sponge disc diam 350 mm (Item no. 49300)Case